How To Openline Myphone MY28/s

DO THIS AT YOUR OWN RISK

NOTE: YOU MUST ROOT YOUR DEVICE BEFORE DOING THIS, 

USE KINGROOT TO ROOT YOUR PHONE

DOWNLOAD KINGROOT HERE 

KINGROOT

Before doing that just back up your current IMEI . Just incase you imei can be change

1. Open Dialer and dial this codes *#*#83781#*#* (Engineer Mode) 

2. Go to Telephony –> Set IMEI

3. Copy your Sim1 and Sim2 IMEI on a piece of paper

Or you can remove your phone battery you can see the imei in the back of you phone

REQUIRMENTS

Terminal Emulator (download on Playstore) 

Fix Openline file

Download here 

( FIX OPENLINE.RAR )

Common Sense 

After downloading FIX OPENLINE.rar, extract it using RAR, 7zip, etc.. 

Open the extracted folder and you can see, wcnfixnv1.img, wcnfixnv2.img, wfixnv1.img, wfixnv2.img. 

Copy those 4 files and put it in the root of your SD Card ( Wag ialagay sa kahit anong folder ) 

FOLLOW THIS SIMPLE STEPS (COMMON SENSE BARELY NEEDED)

Open Terminal Emulator 

Type su (after press enter may lalabas na “#” sign) 

Type ( dd if=sdcard/wfixnv1.img of=dev/block/mmcblk0p5 ) then enter, may lalabas na message at babalik yung “#” sign 

4. Type ( dd if=sdcard/wfixnv2.img of=dev/block/mmcblk0p6 ) tapos enter, may lalabas na message at babalik yung “#” sign

5. Type ( dd if=sdcard/wcnfixnv1.img of=dev/block/mmcblk0p10) tapos enter, may lalabas na message at babalik yung “#” sign

6. Type ( dd if=sdcard/wcnfixnv2.img of=dev/block/mmcblk0p11) tapos enter, may lalabas na message at babalik yung “#” sign

7. Type ( reboot ) tapos enter para mag reboot yung device

( SUCCESS )

8. Check your IMEI.

Open Dialer and dial this codes *#06#

Kung nabago ang inyong IMEI, then Go back to Engineer Mode and restore your original IMEI

NOTE: 

APPLICABLE ETO SA MGA NAKAPAG OPENLINE USING FIRMWARE AT PWEDE DIN ETO GAWIN PANG OPENLINE.

HIT LIKE & THANKS TO 

#Team28Devs